IVS-8822

PRODUCTS > dispenser > IVS-8822

IVS-8822

Product Function Introduction:
Powerful spatial dispensing trajectory movement ability, CCD grab the product profile, automatically calculate the product center position and correct the compensation amount of each axis of motion. Through the cooperation of multi-axis system, it can realize the complex movement trajectory, meanwhile drive the dispensing control system to dispense glue automatically, the glue is sprayed with accurate angle and path, at present, it is maturely applied with two kinds of piezoelectric valves and needle contact dispensing, both dispensing modes can realize the precise control of the glue weight, higher aspect ratio, and other core parameter requirements.

Product features and applicable scenes:
1. Able to adapt to a variety of complex structure of the product
2. Able to control the spraying position and flow of glue, thus ensuring the accuracy and consistency of the product.
3. Able to adjust dispensing parameters automatically according to environmental changes in real time to ensure the stability and efficiency of the dispensing process 4. CCD positioning and detection system to achieve the glue width detection is widely used in the field of cell phone full-screen small round holes, the glass end face of the cell phone shaped screen dispensing, coating, as well as TP, LCM gap filling, etc.
Product Parameters
power220V 3.8KW  32A 50/60HZ
pneumaticPositive pressure 0.5-0.7MPa / Negative pressure 90psi(5.5bar)
Overall dimensions1600*1200*1900(W*D*H)
Equipment weight1300KG
communication protocolsSMEMA
drive systemServo motor (Z/A)
operating systemWin7/10
Dispensing area200*100mm
Stroke XYZ600X400X200
XYZ axis positioning accuracyXY:±008mm, Z:±0.01mm,30 arcsec
XYZ axis repeatabilityXY:±005mm, Z:±0.005mm,30 arcsec
Maximum speed500mm/s
maximum acceleration1.5g


Previous: IVS-9821
Next: IVS-1E441